PLP banner

Per page:  

Petra SKU: PYLPLPW12D
Part No.: 222464
Vendor SKU: PLPW12D
Retail Price: $126.99
  • 1,600 watts max
  • 800 watts RMS
  • Dual 4-ohm voice coils
  • 60 oz. magnet
  • Black steel basket
  • Nonpressed paper cone
  • Specially treated foam surround
  • Spring-loaded push-down speaker terminals
  • Each

Petra SKU: CERHS122D
Part No.: 272530
Vendor SKU: HS122D
Retail Price: $99.99
  • 1,200 watt max power handling; 250 watts RMS
  • Adds extra bass to vehicles; especially ideal for those with space limitations
  • 12-in. dual 2-ohm configuration; SPL: 85 dB
  • Dual voice coil
  • Stamped-steel slim-mount frame with encapsulated motor
  • Vented motor structure for optimal thermal heat dissipation
  • Polycotton spider with spaced, woven-in tinsel wires
  • Oversized parabolic dust cap for extreme rigidity
  • Unimount gasket surround
  • Mounting depth: 3.81 in.
  • Mounting diameter: 11.14 in.
  • Each

Petra SKU: PIOTSW1200PRO
Part No.: 276248
Vendor SKU: TS-W1200PRO
Retail Price: $240.00
  • 12" PRO Series subwoofer
  • 1,500W max power (450W nominal)
  • Optimally blended pulp cone woofer with corrugated surround
  • Dual 4Ω voice coil
  • Designed for high sensitivity & power handling

Petra SKU: PIOTSWX1210A
Part No.: 329800
Vendor SKU: TS-WX1210A
Retail Price: $320.00
  • 12-in. woofer
  • 1,300 watts max, 350 watts nominal
  • Cellulose fiber cone
  • Urethane surround
  • Built-in Class D amp
  • Variable bass boost (0 dB to 12 dB, 40 Hz to 100 Hz)
  • Gain and frequency control at side panel
  • Frequency response: 20 Hz to 125 Hz
  • Sensitivity: 114 dB at 1W/1m
  • Carpeted, trapezoidal prism enclosure shape for nonslip, durable, and scratch-resistant surface
  • Can be installed in multiple locations
  • Includes wired remote bass control knob, power/ground/remote wiring harness, and manual

Petra SKU: SSTT5122
Part No.: 293768
Vendor SKU: T5.122
Retail Price: $199.99
  • 2,000W max
  • 1,000W RMS
  • Efficiency: 86dB @ 1W/1m
  • Dual 2Ω
  • Overcompensating motor structure for increased magnetic strength
  • 12mm T-yoke & top plate improve low-frequency dynamics
  • Vented T-yoke & frame reduces voice-coil heat buildup
  • Nonmagnetic, nonresonate die-cast aluminum frame
  • 3" four-layer voice coil with direct-connect wire increases power handling
  • High-temperature-tolerant adhesives resist thermal failure
  • Nontransfer spruce pulp cone with UV & chemical protection
  • Stitched & glued surround/cone joints for strongest bonding
  • Extended excursion polyether foam surround with UV & chemical protection
  • Dual polycotton suspension dampens violent accelerations
  • Mounting depth: 7.25"
  • Optimum sealed box: 1.5 cu ft
  • Optimum ported box: 2.5 cu ft
  • Includes 1-piece gasket/trim ring with concealed mounting holes

Petra SKU: POWBAMF124
Part No.: 322846
Vendor SKU: BAMF-124
Retail Price: $199.99
  • 3,500 watts max; 1,750 watts RMS
  • Dual 4 ohm
  • Overcompensating motor structure for increased magnetic strength
  • 12 mm T-yoke and top plate improve low frequency dynamics; vented T-yoke and frame reduces voice coil heat buildup
  • Nonmagnetic nonresonate die-cast aluminum frame
  • 3-in. 4-layer voice coils with direct connect wire increases power handling
  • High-temperature-tolerance adhesives resist thermal failure; nontransfer spruce pulp cone with UV and chemical protection; stitched and glued surround/cone joints for strongest bonding
  • Extended excursion polyether foam surround with UV protection; dual-polycotton suspension dampens violent accelerations; stitched voice coil leads prevent potential damage
  • Efficiency: 84.6 dB at 1W/1m
  • Motor volume: 272 oz.
  • Mounting depth: 6.75 in.
  • Optimum sealed enclosure: 1 cu ft
  • Optimum ported enclosure: 2 cu ft
  • Includes 1-piece gasket/trim ring with concealed mounting holes
  • Each

Petra SKU: POWMOFOS12D2
Part No.: 322851
Vendor SKU: MOFOS-12D2
Retail Price: $169.99
  • 12"
  • 2,500W max
  • 1,200W RMS
  • Efficiency: 86.4dB @ 1W/1m
  • Motor volume: 254oz
  • Mounting depth: 7.5"
  • Optimum sealed enclosure: 1.25 cu ft
  • Optimum ported enclosure: 2.5 cu ft
  • Dual 2Ω
  • Overcompensating motor structure for increased magnetic strength
  • 10mm T-yoke & top plate improve low frequency dynamics
  • Vented T-yoke & frame reduces voice coil heat buildup
  • Die-cast aluminum heat sink dust cap absorbs voice coil heat
  • Aluminum dust cap fins dissipate heat & strengthen cone
  • 2.5" 4-layer voice coil with large-gauge wire increases power
  • High-temperature-tolerance adhesives resist thermal failure
  • Nickel-plated 8-gauge spring-loaded compression wire terminals
  • Nontransfer spruce pulp cone with UV & chemical protection
  • High-density polyether foam surround with UV & chemical protection
  • Dual-polycotton suspension dampens violent accelerations
  • Stitched voice coil leads prevent potential damage
  • Includes 1-piece gasket/trim ring with concealed mounting holes

Petra SKU: CERV124DV2
Part No.: 291322
Vendor SKU: V124DV2
Retail Price: $149.99
  • 1,300W max
  • 450W RMS
  • Proprietary stamped cast Vega basket design
  • Optimized high-power single-stacked motor structure
  • Double-stitched Vega red Santoprene surround
  • High-power impedance selector
  • Proprietary horizontal-mounted spring-loaded terminals
  • Dual 2 ohm/4 ohm
  • Each

Petra SKU: PIOTSA30S4
Part No.: 339297
Vendor SKU: TS-A30S4
Retail Price: $115.00
  • Dynamic tornado cone design for more stability during excursion
  • Rubber surround
  • 8-gauge push terminals for easy connectivity
  • 12 in.
  • 1,400 watts max
  • 400 watts nominal

Petra SKU: PIOTSA3000LB
Part No.: 341269
Vendor SKU: TS-A3000LB
Retail Price: $320.00
  • 12 in. subwoofer
  • 1,500 watts max, 400 watts RMS
  • Frequency response: 20 Hz to 1 kHz
  • 2 ohm impedance
  • Single voice coil
  • Rubber surround
  • Angled push terminals make it easy to connect speaker wires
  • Fully covered steel mesh grille
  • Removable feet and cushions
  • Carpeted enclosure for nonslip and scratch-resistant surface
  • Embroidered Pioneer logo
  • Can be installed freely in the cabin or luggage area
  • Enclosure dimensions: 23-5/8 in. W x 6-3/4 in. H x 13-3/4 in. D

Petra SKU: PIOTSA3000LS4
Part No.: 341270
Vendor SKU: TS-A3000LS4
Retail Price: $220.00
  • 12 in. subwoofer
  • 1,500 watts max, 400 watts RMS
  • Frequency response: 20 Hz to 1 kHz
  • Unique design with just 3-1/2 in. mounting depth
  • Small enclosure use (.5 to .1 cu. ft.)
  • 4 ohm impedance
  • Single voice coil
  • Glass fiber and mica reinforced IMPP cone
  • Rubber surround
  • Double reinforced spider
  • 8 gauge push terminals
  • Cutout dimensions: 11-1/8 in. diameter

Petra SKU: DBDWDX12G14
Part No.: 344381
Vendor SKU: WDX12G1.4
Retail Price: $349.98
  • 2,000 watts max
  • 1,000 watts nominal output power
  • 3 in. high-temperature voice coils
  • Nonpressed paper cone
  • Double-stitched foam surround
  • Dual poly-cotton dampeners
  • Die-cast aluminum vented basket
  • Rubber gasket trim ring
  • Large-gauge compression terminals
  • Protective magnet cover
  • Frame diameter: 12.74 in.
  • Woofer cutout diameter: 11.07 in.
  • Mounting depth: 6.84 in.
  • Includes owner's manual/warranty

Petra SKU: DBDSPF12D4
Part No.: 348831
Vendor SKU: SPF12D4
Retail Price: $299.95
  • 1,000 watts max
  • 300 watts nominal
  • Frequency response: 20 Hz to 300 Hz
  • SPL: 85.8 dB
  • 2.5 in., 4-layer dual-4-ohm voice coil with aluminum former
  • IMPP cone with foam surround
  • 40 oz. ferrite magnet
  • Ultra-thin, stamped-steel frame design
  • Blue zinc-finished top and bottom plates
  • Mixed C fiber spider
  • Heavy-gauge spring terminals
  • Mounting depth: 3.5 in.
  • Cutout diameter: 11.18 in.
  • Outside diameter: 12.43 in.

Petra SKU: PIOTSA301S4
Part No.: 387216
Vendor SKU: TS-A301S4
Retail Price: $155.00
  • 1,600 watt maximum; 500 watt nominal, 4 ohm impedance
  • Extra speaker designed to add more bass performance to a vehicle's sound system
  • Single voice coil; dual-layer, fiber-reinforced elastic polymer surround
  • Honeycomb IMPP composite cone structure
  • 1-year warranty
  • Includes 8 screws and gasket
  • Each

Petra SKU: PIOTSA301D4
Part No.: 387217
Vendor SKU: TS-A301D4
Retail Price: $165.00
  • 1,600 watt maximum; 500 watt nominal, 4 ohm impedance
  • Extra speaker designed to add more bass performance to a vehicle's sound system
  • Dual voice coil; dual-layer, fiber-reinforced elastic polymer surround
  • Honeycomb IMPP composite cone structure
  • 1-year warranty
  • Includes 8 screws and gasket
  • Each

Petra SKU: PIOTSD12D2
Part No.: 394637
Vendor SKU: TS-D12D2
Retail Price: $260.00
  • 1,500-watt maximum, 500-watt RMS power output; 2-ohm impedance
  • Designed to boost low end of a vehicle's audio system
  • Frequency response: 20 Hz to 4.7 kHz; sensitivity: 76 dB
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • 12-in. dual-voice-coil woofer; oversized 4-layer voice coils, high-energy 73.6-oz. double-stacked magnets, and vented pole yoke increase overall power handling and SPL output with no sacrifice in sound quality
  • Can be mounted in sealed or ported enclosure
  • Mounting depth: 6-1/8 in.
  • Cutout dimensions: 11-1/8 in.
  • Includes trim ring, mounting screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOTSD12D4
Part No.: 394642
Vendor SKU: TS-D12D4
Retail Price: $260.00
  • 2,000-watt maximum, 600-watt RMS power output; 4-ohm impedance
  • Designed to boost low end of a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 20 Hz to 4.7 kHz; sensitivity: 78 dB
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • 12-in. dual-voice-coil woofer; oversized 4-layer voice coils, high-energy 73.6-oz. double-stacked magnets, and vented pole yoke increase overall power handling and SPL output with no sacrifice in sound quality
  • Can be mounted in sealed or ported enclosure
  • Mounting depth: 6-1/8 in.
  • Cutout dimensions: 11-1/8 in.
  • Includes trim ring, mounting screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOTSW3020PRO
Part No.: 395552
Vendor SKU: TS-W3020PRO
Retail Price: $405.00
  • 3,500 watts max power handling; 1,800 watts nominal
  • Frequency response: 20 Hz to 20 Hz; sensitivity: 88 dB; dual 2-ohm nominal impedance
  • Aftermarket 12-in. component subwoofer designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Super-wide urethane surround and combined seam achieve high durability with a high-power input
  • Interlaced tinsel wire improves durability by reducing physical stress under high excursion
  • Assembly of power motor and large magnet produces high sensitivity and high power handling
  • Internal cover draws heat away from voice coil and improves high power handling
  • Red, high-quality die-cast aluminum baskets maintain better accuracy under high power and for better heat dissipation
  • 4-layer copper long voice coil with aluminum bobbin; powerful motor to keep the job going under high power and high heat stress situations
  • Includes mounting screws, manual, and 1-year warranty card
  • Each

Petra SKU: PIOTSA120D4
Part No.: 396608
Vendor SKU: TS-A120D4
Retail Price: $145.00
  • 1,500-watt maximum, 500-watt RMS power output; 4 ohm dual voice coil
  • Designed to replace existing, older OEM subwoofer or add new one to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 20 Hz to 2.3 kHz; sensitivity: 77 dB
  • Cone made from glass fiber and mica-interlaced injection-molded polypropylene composite; butyl rubber surround and polycotton/cotton dual spider for strength and linearity during high excursion
  • Kapton voice coil bobbin; copper voice coil wire
  • 60-oz. double-stacked ferrite magnet and vented pole yoke for increased power handline
  • Stamped metal woofer basket
  • Push-type wire terminals
  • Mounting depth: 5-3/4 in.
  • Includes trim ring, 1-1/8-in. screws, adhesive-backed foam gasket, manual, and warranty information
  • Each